Category: Cell Phones & Accessories

Posted on

Where do I recycle my old electronics?

Note: This post was written by SEI staff, Aida Sefic Williams.

During the last few weeks, I have received an increasing number of emails asking where people can recycle their old electronics. If you search for this answer online, you will probably be bombarded with various possibilities to return the electronics to manufacturers, sell your electronics for some extra cash, recycle your old electronics for a charitable cause, or simply bring the electronics to a national retailer. Another option, of course, is to bring your old electronics to a state-run or -approved collection event. Sometimes, going through pages and pages of information is not only time consuming, but it is also overwhelming.

To save you a headache, I took on the task of finding various e-waste collection and recycling methods. You can view various Electronic Take-Back and Donation Programs in a neat, easy-to understand format. This spreadsheet groups various electronic collection and recycling organizations in the following categories: Retailer Recycling Programs, Manufacturer Take-Back Programs, Electronics Trade-In Programs, Electronic Donation/Charity Programs, and State Collection Programs.

Rather than only providing you with links, the spreadsheet also tells you if you can simply drop off your equipment at a location, or if the electronics can be simply mailed to a facility. In addition, you can also find out simply which electronics are accepted by the various organizations. More importantly, I have also included links to various data-erasure methods. A common concern many consumers have is the security of their data before they turn in their old electronics.

In order to erase personal information from cell phones, feel free to visit the following websites:

To remove personal information from computers, the following services are available:

The Sustainable Electronics Initiative (SEI) does not endorse any specific data-erasing programs. The stated programs were listed for general consumer data and do not signify endorsement.

Did we leave anyone off? If we missed any electronic take-back organizations or charities, please let us know at sei@istc.illinois.edu.

Posted on

Design for Disposal: The Premature End to Today’s Electronics and other Products

Note: This post was written by SEI staff member, Amy Cade.

Our planet is taking quite a beating. This has never been more evident than today given that, thus far, 4.8 million gallons of oil has spilled into the Gulf of Mexico.

What can we do to help this planet? I’ll go with my strong suit and tackle some problems with design-the first step in the process of consumption. We are constantly designing things to be used briefly then thrown away (consider packaging.) I have addressed this issue before (Greener Electronics Start with Smarter Designs and Designing Wastefulness.)  But I was given a new lease on the topic after hearing a 7-year-old confirm my aggravation.

A couple weeks ago the Sustainable Electronics Initiative set up a booth at an expo called “Naturally Illinois” held by the Institute of Natural Resource Sustainability. Over 1000 students walked through the expo and looked at about 50 exhibits all having to do with modern science conducted at the University of Illinois.

Our booth housed a kid friendly information board displaying electronic waste information. A curious 7-year-old came up to our booth and after we gave a brief explanation of electronic waste and why/how big the problem is, he responded with the question: “Why don’t they just make computers that last 100 years?”

One of the answers to this question is an easy one: planned obsolescence. The reason why this is one of the answers is more complicated.

Planned obsolescence is when a manufacturer consciously designs a product to not last as long as it could so that consumers will purchase more of those products. Razors that indicate they should be changed by a strip that wears away before the actual end of life of the razor is an example of planned obsolescence.

Despite the image painted in my mind after hearing this definition, planned obsolescence was probably not hatched by mustache twirling guys with an evil laugh. Companies need consumers to continuously purchase their products and if their consumers stop buying after one purchase that company will probably not last very long.

But there are ways a business can thrive while being sustainable. In fact, sustainability often helps profits. Not only will consumers trust the quality of the products if they are not designed for obsolescence and therefore keep buying from that company, they will also pass this information to their friends–in this age of the Internet and easy communication, having quality long-lasting products will be noticed. There are also other ways in which companies can keep having the consumers come back for more. Making components or entire products out of materials that can safely decompose will allow consumers to responsibly throw them away and then buy more. (See this article about biodegradable shoes.)

We don’t have to stop at biodegradable materials. I hope designers continue to incorporate things that can be reused, upgraded, easily disassembled, or made from other products. An example of a product that starts to address this concept is Motorola’s phone, “Renew,” which has a casing made of 100% recycled materials.

Have you recently thought of a great invention?  Think about how it can be made with something you are throwing away and what will happen to that product when you are done using it.

Posted on

30% of use still means there is 70% waste

Note: This post was written by SEI staff, Aida Sefic Williams.

Recently, AppleInsider published a story titled “Nearly 30% of Apple’s first-gen iPhones are still in use – report“. In short, the report mentions several statistics regarding the first generation iPhone. Please keep in mind that the first iPhone was released in June 2007, only to be replaced by the iPhone 3G in July 2008. That means that this phone was marketed (very well, if I remember correctly) for a mere 13 months.  The first generation iPhone sold 6.1 million units, which were  most likely all purchased within those 13 months. After all, why would someone want to buy an old version of a phone, if the newer, cooler, faster, sleeker model is available for a similar price?

The report names several other statistic, but I want to focus on the main statistic here. 30% of first generation iPhones are still being used. This means that 1.83 million first generation iPhones are still in use. And yes, that is a large number. However, 4.27 million is a greater number – this represents the amount of first generation iPhones that are no longer in use. What happened to these phones? Did they break? Did they suffer a fall that rendered them incapable of functioning correctly? I bet this happened only rarely. Instead, Apple came out with a new product. This product was superior to the previous generation of Apple products.  If my memory serves me correctly, since the introduction of the first generation iPhone, the world has also been introduced to two more generations of iPhones, as well as the iTouch and the brand new iPad. (And in related news: Apple Sold 1 million iPads in a month!)

While these new gadgets are a lot of fun, I am concerned about our lasting impact on the environment. The resources and natural capital needed to make these products is expensive, as well as environmentally hazardous. More importantly, the vast disposal and often improper disposal methods increase our need for a more sustainable system. However, Electronics Recyclers International CEO John Shegerian seems to disagree with me. In the article “Why the E-Waste Industry Love the iPad“, he mentions that this the iPad is a good thing.

I wonder if it is possible to allow designers to be creative and create new products, which would add to existing gadgets, instead of creating a desire for increased disposal and consumption of new products? Even if Apple, or any other electronics designer and manufacturer, would introduce a new performance-based, rather than product-based, model for their business and industry. We still have to convince consumers  that a cell phone, computer, or other electronic device can function to its full potential by simply maintaining the equipment, similar to the way you maintain your car, and possibly upgrading to a few new features. This would allow us to use our new gadgets until they actually fail, instead of only lasting as long as we think they are fun. For example, when the seats in your car start to wear down, do you get rid of your car and purchase a new one? Why can’t we have the same model for our electronics?

Apple is obviously concerned about their impact on the environment, as they have published information about the carbon emissions related to their products. By performing such analyses, one only hopes that Apple designers and engineers will be able to make products which will improve their products by leaving a lower environmental footprint. But I do want to encourage Apple and other electronic recyclers to research the life cycle impacts of their products, and consider not only the design of their products, but also the lasting environmental impact their products will leave on the Earth and future generations.

Posted on

E-Waste Competition Winners Announced

 

Note: This post was written by SEI staff, Aida Sefic Williams.

Winners have been announced in the International E-Waste Competition.  The competition is part of the Sustainable Electronics Initiative (SEI) at the University of Illinois at Urbana-Champaign.

The competition is designed to prompt the industrialized world to dialogue about product designs for environmentally responsible computing and entertainment. The goals of this competition are to learn about ways to re-use electronic waste (E-Waste) for new and productive means, explore new ideas of how to address E-Waste problems, and contribute to the body of knowledge that advances the practice of environmentally responsible product design.

The winners were announced at the Illinois Sustainable Technology Center (ISTC), the coordinating agency for the Sustainable Electronics Initiative.  ISTC is part of the Institute of Natural Resource Sustainability at the University of Illinois.

The videos of the winning entrants were shown as a part of the International E-Waste Video Film Festival. The videos of the winning entries will be shown on the websites of the e-waste competition www.ewaste.illinois.edu, www.istc.illinois.edu, www.sustainelectronics.illinois.edu, as well as SEI’s YouTube Channel.

Entries were judged in two categories: Technical/Geek and Artist/Designer. A total of 33 entries were submitted; 26 were in the Artist/Designer category, and 7 in the Technical/Geek category. Prizes were awarded for the top three projects within each category, along with two honorable mentions in the Artist/Designer category. The first, second, and third place winners will receive $5000, $3000, and $1000 monetary prizes, respectively. In addition, honorable mentions will receive $500. The total amount of money to be given out during the International E-Waste Competition is close to $20,000, which has been made possible through generous contributions by several sponsors, including Dell and Wal-mart.

Technical/Geek Category Winners

First Place

  • Team: Port-e-garden
  • Project name: Port-e-garden
  • School: University of Illinois at Urbana-Champaign
  • Video

Second Place

  • Team: Chaps
  • Project name: BioGrow
  • School: University of Illinois at Urbana-Champaign
  • Video

 

Third Place

  • Team: CSULB Studio Group #1
  • Project name: The Pure Drive Home Automation and Computing System
  • School: California State University, Long Beach CA
  • Video

Artist/Designer Category Winners

First Place

  • Team: revOlve
  • Project name: revOlve
  • School: Rochester Institute of Technology, New York
  • Video

 

Second Place

  • Team: eLiminators
  • Project name: E-volve
  • School: California State University, Long Beach CA
  • Video

Third Place

  • Team: eMotion
  • Project name: eMotion
  • School: California State University, Long Beach CA
  • Video

 

Honorable Mention

  • Team: CSULB ID 2011
  • Project name: The Personalized E-Waste Recycling Bin
  • School: California State University, Long Beach CA

Honorable Mention

  • Team: CSULB ID Team
  • Project name: E-Responsibility
  • School: California State University, Long Beach CA

The competition was started at UIUC in the fall of 2009. In 2010, the competition was expanded to an international base, where students from all over the globe were able to submit their projects and a 2-minute video online. Each project was judged on their project description and video.

The international scope of the competition was evident through students who submitted entries from various states in the US (Illinois, Minnesota, California, New York) and other countries (Cyprus, Canada, Australia, Turkey and South Korea). The jury of the competition included a variety of experts, including

  • Vicky Matranga, Design Program Coordinator of International Housewares Association;
  • Clive Roux, CEO of the Industrial Designers Society of America;
  • Joe Jasinski, Global Senior Industrial Design Manager at Dell, Inc.;
  • Steve Belletire, Design Area Head at Southern Illinois University;
  • Sam Al-Basha, Engineer at the IL Department of Commerce and Economic Opportunity;
  • Chris Newman, Materials and Management Branch of US EPA;
  • Mike Tibbs, Sr. Director of Information Systems Division Compliance at Wal-mart;
  • Roger L. Franz, Engineering Manager at Motorola;
  • and Will Larkin, Director of Vendor Management Office and Star Complex at Wal-mart.
Posted on

SEI Symposium

Note: This post was written by SEI staff member, Amy Cade.

The 2010 Electronics and Sustainability: Design for Energy and the Environment Symposium held two weeks ago was a great success! Over 20 impressive speakers in the fields of academia, manufacturing, retail, government, and recycling presented their take on electronics and sustainability. We had an impressive turnout, lively conversation, and overall, a great time had by all.

Here are some highlights from the event: Continue reading “SEI Symposium”

Posted on

Helping two great causes at once!

cell phone recyclingNote: This post was written by SEI staff, Aida Sefic Williams.

By now, everyone has heard of the massive earthquake which struck Haiti last week. Undoubtedly, everyone has heard horrid stories of devastation. As I wondered what to write this week’s blog about, I found an article, which really speaks for itself, and I just wanted to make our blog followers aware of this cause, because it is a wonderful way to incorporate ewaste issues along with charity.

Continue reading “Helping two great causes at once!”

Posted on

International E-waste Design Competition Turns Refuse into Resource

Electronic waste, or “E-Waste,” generated by computers, TVs, cameras, printers, and cell phones, is a growing global issue. According to the U.S. EPA, Americans currently own nearly 3 billion electronic products and as new products are purchased, obsolete products are stored or discarded at alarming rates. About two-thirds of the electronic devices removed from service are still in working order. However, only about 15% of this material is recycled while the vast majority is disposed in landfills. The Sustainable Electronics Initiative (SEI), hosted by the Illinois Sustainable Technology Center (ISTC), is pleased to announce the International E-Waste Design Competition, in which participants will explore solutions to this problem at the local level and beyond, by using e-waste components to create appealing and useful products. Continue reading “International E-waste Design Competition Turns Refuse into Resource”

Posted on

A satirical and very true view of the e-waste problem

Note: This post was written by SEI staff, Aida Sefic Williams.

The Onion is a very popular, purely fictional and extremely satirical website. The Onion usually consists of stories whose point is only to amuse, with stories such as “Most College Males Admit to Regularly Getting Stoked”. As topics become more interesting to media outlets, The Onion is usually there to make fun of those same topics with their dead-pan sarcasm. While amusing, most of their articles have never struck a particular chord with me until their article titled “New Device Desirable, Old Device Undesirable”. Continue reading “A satirical and very true view of the e-waste problem”

Posted on

Life Cycle Analysis: Part 2

Note: This post was written by SEI staff, Aida Sefic Williams.

Last week, I described what life cycle analyses are and briefly touched on how they can be used by companies in Life Cycle Analysis: Part 1. This post (along a few more that will follow) will be a part of a blog mini-series about life cycle analyses. I want to educate our readers about the general concepts of LCAs. Without further ado, here comes part 2: Continue reading “Life Cycle Analysis: Part 2”

Posted on

SEI Provides “Ask an Expert” Service

The Sustainable Electronics Initiative (SEI), hosted by the Illinois Sustainable Technology Center (ISTC), is pleased to announce the availability of its online “Ask an Expert” service for the submission of questions related to electronics and their environmental impacts.

Questions related to electronic waste, or “e-waste” issues, sustainable electronics design, improving electronics manufacturing processes and related topics can be submitted via an online form available at http://www.sustainelectronics.illinois.edu/services/askexpert.cfm. SEI staff members will provide one hour of free Internet and/or literature searching related to your sustainable electronics question. Also provided is input from ISTC staff scientists and/or referrals to external contacts for further information on technical questions. Responses can be expected within a week (usually within 1-2 business days). Citizens, organizations, government agencies, businesses, non-profit groups, and academic institutions are all invited to use this free service.

The responses obtained from the Ask an Expert service are meant for informational purposes only, and should not be construed as endorsements by SEI, ISTC or any affiliated organization. Responses are also meant to be starting points for inquirers rather than definitive answers, advice or prescriptions for action. Inquirers must draw their own conclusions based upon the information provided.

In the near future, questions and answers received via this service will be archived and searchable on the SEI web site, www.sustainelectronics.illinois.edu. An extensive collection of resources is also under development for the web site, and archived Ask an Expert questions and answers will be integrated into relevant resource collections.

According to the U.S. EPA, Americans own nearly three billion electronic products and continually purchase new ones to replace those deemed “obsolete,” even though about two-thirds of the devices are still in working order. As designers, manufacturers and the general public are becoming more aware and concerned about this issue, SEI’s Ask an Expert service will be one way to address concerns and assist in more sustainable practices.

SEI is a consortium dedicated to the development and implementation of a more sustainable system for designing, producing, remanufacturing, and recycling electronic devices. Members of the consortium include academia, non-profit organizations, government agencies, manufacturers, designers, refurbishers, and recyclers. Specific elements of the SEI include programs for research, education, data management, and technical assistance. SEI conducts collaborative research; facilitates networking and information exchange among participants; promotes technology diffusion via demonstration projects; and provides forums for the discussion of policy and legislation.

For more information on SEI, visit www.sustainelectronics.illinois.edu or contact Dr. Tim Lindsey, Associate Director of ISTC, at 217-333-8955 . For more information on the Ask an Expert service contact Laura Barnes, ISTC librarian at 217-333-8957.

ISTC is a unit of the Institute of Natural Resource Sustainability at the University of Illinois at Urbana-Champaign.