Future of electronics after 2012

Note: This post was written by SEI staff, Aida Sefic Williams.

Whenever electronics are discussed, the conversation always involves the argument that electronics are environmentally damaging. In order to make electronics, we need materials that have to be mined out of the ground, be highly processed, and manufactured in astronomically high quantities. Electronics also require energy to function, and many electronic components are often discarded with little or no consideration about the materials, energy, and time that went into making the product.

rareearthIf all of the previous points were not enough, I unfortunately have yet another thing to add: the consumption of rare earth materials. The phrase “rare earth materials” has been used frequently when discussing many technologically advanced designs, but what exactly does this phrase mean? Rare earth materials are 17 metallic elements, all of which have similar properties, as they reside in the same families within the periodic table of elements. The elements are: lanthanum, cerium, praseodymium, neodymium, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium, scandium, and yttrium [1].

While the general consumer may not hear about many of these individual elements, one thing is certain: They are vital to our current technologically-charged world. These materials are used in fiber optics, hybrid car batteries, x-ray units, magnets used in computer hard drives, and many other applications [2]. While many of us enjoy the applications of rare earth materials (REM), we may not be able to enjoy them for much longer. Since these materials are rare, it seems that we have currently depleted 95% to 97%, depending on which article you read, of the Earth’s REMs [3]. The rapid depletion of these materials becomes alarmingly more critical, since China controls most of the materials. More significantly, some reports have stated that China has been decreasing their REM exports and will completely stop them in 2012. (If you believe that the world will end in 2012, I am sure this news rings a very loud and alarming bell.)

While one may easily dismiss articles published by The Economic Collapse as pure paranoia, it is much harder to dismiss several claims by the Government Accountability Office (GAO). In April of 2010, the GAO gave a presentation, which is publicly available, titled “Rare Earth Materials in the Defense Supply Chain“. The report explains further information and details about rare earth materials, their applications, as well as possible solutions to the REM depletion.

Slide 16 of the GAO report lists other countries with rare earth material deposits. The list of countries includes the U.S., China, Australia, Brazil, India, Malaysia, and others. Furthermore, the report mentions that work new rare earth material mines needs to be begin. IndustryWeek reports of a mine in California that was previously used to mine REMs within the United States, but the mine’s Chinese competitors successfully drove the mine out of business. Naturally, an option under consideration is the re-opening of this new mine, which would take at least 3-5 years to become fully operational. In order to create a completely new mine, significant capital investment is needed in order to get the mine 100% operational in 7-15 years, according to the GAO. In the best case scenario, that leaves the U.S. and remainder of the world without REMs 1-3 years, or in the worst case scenario, this would be 5-13 years.

Some sources, such as the Natural News, suggest that we (the global, societal “we”) should recycle rare earth materials. After all, there is a significant market for recycling common metals such as lead, copper, and aluminum. The UN Environmental Programme has stated the importance of metals recycling. In fact, the UNEP has published a report stating current metal recycling rates and also explains the need for increased recycling of specific materials of interest. A press release from May 13, 2010, offers a brief summary as well as a link to the full text of the report.

If you read this post and all of its related links, you may start believing in the Mayan prediction for the year 2012. But the goal of this blog post is not to scare or stir people into a frenzy. Instead, the goal of this post is to inform and brainstorm! Because of this, I want to involve you, the reader. I want your input and feedback. What do you think can be done? Is increased mining the answer? Do we need to find new technologies for recycling these precious materials? Can the world’s brilliant scientists create new materials which would have the desired properties of rare earth materials? What other options can you offer?

While the technical questions are important, it is vital to also ask several social questions. For example, if you do believe in being eco-conscious, how much are you willing to give up in order to save these precious metals? Will you hold on to your computer, cell phone, or other device for 2-3 instead of 1.5 years, if it will save some rare earth materials which could be used in medical equipment that can save someone’s life? What are you willing to give up? And how much of it?

There are many more questions that I could ask, but I think these brain teasers should be enough. What do you think? I would love to enter a dialogue, not of “The world is ending!” but, “This is a problem, and here is what we can do”. Please, I invite you all, scientists, engineers, designers, environmentalists, students, consumers and everyone else to humor me for a few minutes. Let me know what you think about this subject!

Death of Advanced Recycling Fee?

Note: This post was written by SEI staff, Aida Sefic Williams.

In the last few weeks, the issue of California’s e-waste recycling has become an increasingly prominent issue.  When speaking of US electronic waste rules, the general statement was “California is the only one with an advanced recycling fee (ARF)”, but their process seemed to work. After all, California’s e-waste laws have been in place much longer than e-waste legislation of other states. Unfortunately, it seems that California’s model of e-waste collection has unfortunately failed.

It seems that in 2002, when e-waste legislation was first considered and drafted, California also considered manufacturer responsibility legislation (Modesto Bee), which is currently used by 21 states. The voices of the tech industry, however, prevailed and California passed an e-waste recycling law requiring an advanced recycling fee (ARF). Given this legislation, when a customer purchases a new monitor or television, they are charged a fee (between $8 and $25), which should in turn be used to recycle the purchased equipment. The goal of the program was to provide a way for consumers to dispose of their electronics responsibly while providing funds for a green industry (Sacramento Bee). While the state had good intentions, no one could foresee the fraudulent activities that would take place.

Due to the amount of state-funding, hundreds of new electronics recyclers sprung up throughout the state (Merced Sun-Star). State officials passing the ARF legislation only counted on the environmental spirits in the state, but they did not foresee the greed that would take over the program. This has led to organizations importing electronics from Arizona and other neighboring states, in order to recycle the electronics within California and receive money for recycling such electronics products. To date, the state of California has paid approximately $320 million for electronics recycling, since the law’s passing in 2005 (Desert Dispatch). The state additionally recognizes that approximately $30 million have been used to recycle electronics which came in from other states, but it has rejected approximately $23 million of fraudulent claims. The Sacramento Bee offers a chart detailing California’s recyclers with the most claim denials.

Understandably, many are angered by the news and knowing their money is used to recycle e-waste  brought in from illegally other states. Environmentalists, however, have another problem with California’s law and its mistreatment – the disposal of usable monitors. California’s model makes it more enticing for people to recycle their “old” but usable monitors, instead of using them until they physically break or donating them to a charitable organization. ScrippsNews tackles this issue in their article “Mounds of usable computer monitors in Calif. dumps“.

So how can California handle this apparent fraud and misuse of their laws and funds? Will they change their laws to reflect other US states? If so, how long will this process take? What can be done in the meantime? These questions need answers – and soon! The failing system needs to go to the root of the problem, update legislation to meet these new challenges, and with proper care and maintenance, the system will be working better, more effectively, and should last for a very long time.

30% of use still means there is 70% waste

Note: This post was written by SEI staff, Aida Sefic Williams.

Recently, AppleInsider published a story titled “Nearly 30% of Apple’s first-gen iPhones are still in use – report“. In short, the report mentions several statistics regarding the first generation iPhone. Please keep in mind that the first iPhone was released in June 2007, only to be replaced by the iPhone 3G in July 2008. That means that this phone was marketed (very well, if I remember correctly) for a mere 13 months.  The first generation iPhone sold 6.1 million units, which were  most likely all purchased within those 13 months. After all, why would someone want to buy an old version of a phone, if the newer, cooler, faster, sleeker model is available for a similar price?

The report names several other statistic, but I want to focus on the main statistic here. 30% of first generation iPhones are still being used. This means that 1.83 million first generation iPhones are still in use. And yes, that is a large number. However, 4.27 million is a greater number – this represents the amount of first generation iPhones that are no longer in use. What happened to these phones? Did they break? Did they suffer a fall that rendered them incapable of functioning correctly? I bet this happened only rarely. Instead, Apple came out with a new product. This product was superior to the previous generation of Apple products.  If my memory serves me correctly, since the introduction of the first generation iPhone, the world has also been introduced to two more generations of iPhones, as well as the iTouch and the brand new iPad. (And in related news: Apple Sold 1 million iPads in a month!)

While these new gadgets are a lot of fun, I am concerned about our lasting impact on the environment. The resources and natural capital needed to make these products is expensive, as well as environmentally hazardous. More importantly, the vast disposal and often improper disposal methods increase our need for a more sustainable system. However, Electronics Recyclers International CEO John Shegerian seems to disagree with me. In the article “Why the E-Waste Industry Love the iPad“, he mentions that this the iPad is a good thing.

I wonder if it is possible to allow designers to be creative and create new products, which would add to existing gadgets, instead of creating a desire for increased disposal and consumption of new products? Even if Apple, or any other electronics designer and manufacturer, would introduce a new performance-based, rather than product-based, model for their business and industry. We still have to convince consumers  that a cell phone, computer, or other electronic device can function to its full potential by simply maintaining the equipment, similar to the way you maintain your car, and possibly upgrading to a few new features. This would allow us to use our new gadgets until they actually fail, instead of only lasting as long as we think they are fun. For example, when the seats in your car start to wear down, do you get rid of your car and purchase a new one? Why can’t we have the same model for our electronics?

Apple is obviously concerned about their impact on the environment, as they have published information about the carbon emissions related to their products. By performing such analyses, one only hopes that Apple designers and engineers will be able to make products which will improve their products by leaving a lower environmental footprint. But I do want to encourage Apple and other electronic recyclers to research the life cycle impacts of their products, and consider not only the design of their products, but also the lasting environmental impact their products will leave on the Earth and future generations.

Continuing the Conversation

Note: This post was written by SEI staff member, Amy Cade.

Last week we announced some highlights from our symposium held in February. Electronics & Sustainability: Design for Energy and the Environment elicited a frenzy of information and thought provoking ideas. An extensive amount of topics were covered through a variety of perspectives.

In hopes of continuing the discussion I plan on posting a multi-part series addressing different topics raised at the symposium.

The first of this series will continue the topic from a recent post: export.

Continue reading “Continuing the Conversation”

The Exportation of E-waste

Note: This post was written by SEI staff member, Amy Cade.

With a huge problem like e-waste it is hard to know where to begin.  Lets start by asking how much e-waste is exported.  Seems simple enough.  We can then decide if the exportation of e-waste should be of major concern.

The Basel Action Network (BAN) claims that the amount of e-waste being exported is big. In one of their videos, they vaguely implied that a lot of e-waste recyclers export the equipment they receive. They said, “plenty of companies…” “the vast majority…” and “all too often…” e-waste recyclers export computers.  BAN also interviewed a politician in Nigeria who estimated that 75% of the computer equipment that comes into his country is not in good enough shape for use and is therefore e-waste.

Continue reading “The Exportation of E-waste”