Death of Advanced Recycling Fee?

Note: This post was written by SEI staff, Aida Sefic Williams.

In the last few weeks, the issue of California’s e-waste recycling has become an increasingly prominent issue.  When speaking of US electronic waste rules, the general statement was “California is the only one with an advanced recycling fee (ARF)”, but their process seemed to work. After all, California’s e-waste laws have been in place much longer than e-waste legislation of other states. Unfortunately, it seems that California’s model of e-waste collection has unfortunately failed.

It seems that in 2002, when e-waste legislation was first considered and drafted, California also considered manufacturer responsibility legislation (Modesto Bee), which is currently used by 21 states. The voices of the tech industry, however, prevailed and California passed an e-waste recycling law requiring an advanced recycling fee (ARF). Given this legislation, when a customer purchases a new monitor or television, they are charged a fee (between $8 and $25), which should in turn be used to recycle the purchased equipment. The goal of the program was to provide a way for consumers to dispose of their electronics responsibly while providing funds for a green industry (Sacramento Bee). While the state had good intentions, no one could foresee the fraudulent activities that would take place.

Due to the amount of state-funding, hundreds of new electronics recyclers sprung up throughout the state (Merced Sun-Star). State officials passing the ARF legislation only counted on the environmental spirits in the state, but they did not foresee the greed that would take over the program. This has led to organizations importing electronics from Arizona and other neighboring states, in order to recycle the electronics within California and receive money for recycling such electronics products. To date, the state of California has paid approximately $320 million for electronics recycling, since the law’s passing in 2005 (Desert Dispatch). The state additionally recognizes that approximately $30 million have been used to recycle electronics which came in from other states, but it has rejected approximately $23 million of fraudulent claims. The Sacramento Bee offers a chart detailing California’s recyclers with the most claim denials.

Understandably, many are angered by the news and knowing their money is used to recycle e-waste  brought in from illegally other states. Environmentalists, however, have another problem with California’s law and its mistreatment – the disposal of usable monitors. California’s model makes it more enticing for people to recycle their “old” but usable monitors, instead of using them until they physically break or donating them to a charitable organization. ScrippsNews tackles this issue in their article “Mounds of usable computer monitors in Calif. dumps“.

So how can California handle this apparent fraud and misuse of their laws and funds? Will they change their laws to reflect other US states? If so, how long will this process take? What can be done in the meantime? These questions need answers – and soon! The failing system needs to go to the root of the problem, update legislation to meet these new challenges, and with proper care and maintenance, the system will be working better, more effectively, and should last for a very long time.

Exciting new electronic designs

Note: This post was written by SEI staff, Aida Sefic Williams.

As I have been browsing the internet for new e-waste related news, I have found a few news items that have sparked my interest. All of the following are exciting, since they promote the use of less energy and also less electronic waste. This is not an advertisement for a particular organization or company, but of a pat on the back to the designers and engineers who are concerned about sustainability.

1. Universal Laptop Chargers

Two Taiwanese companies have openly stated that they are in favor of universal laptop chargers! The two companies are Asustek and Acer, who place fifth and second, in all worldwide laptop shipments (PC Pro). This is very exciting news, as chargers and other laptop and electronics accessories are large suppliers of electronic waste. According to DigiTimes, manufacturers such as  Quanta Computer, Compal Electronics, Wistron, Pegatron Technology and Inventec also support the move to uniform laptop chargers. I am interested to see this new development, since verbal support does not always materialize in financial support. As someone who lives in a household with three laptops for two people, I would be very happy to see a move to a more efficient use of our resources and cables.

2. Bike-Powered Electronic Devices

Cell phones are ubiquitous in today’s society, and one thing accompanying cell phones are their chargers. There have been several design concepts suggesting various ways to charge cell phones by simply using kinetic energy; these ideas include foot power, cranking, rotating, and more (Green Diary). One concept I have heard about on several occasions have been a bicycle-powered cell phone charger. Most designs I have heard about, however, have been student project designs with little marketing capabilities. But it seems that Nokia has created a bike-powered cell phone charger that is marketed toward developing nations or nations with high bike-riding populations (Inhabitat). As someone who loves to ride her bike to work and also forgets to charge her cell phone frequently, this concept is perfect – and perfectly sustainable! With this new product, you can charge your phone, help the environment, and also prevent your cell phone charger from turning into an energy vampire.

3. Cell Phone Charger Energy Vampire Slayer

vampire_finalAs briefly mentioned above, cell phone chargers have a tendency to be energy vampires. Energy vampires are devices that draw energy while plugged into a wall but not plugged into another device. This means that you cell phone is drawing energy when it is only plugged into the wall and not plugged into your cell phone as well. To combat this problem, AT&T has recently announced their first Zero Draw charger. This new technology turns off the charger once your phone or other electronic device is fully charged. This helps protect the environment and your pocketbook! In addition, this charger also aims to increase its compatibility with various chargers and ports.

I hope that you share my excitement in these new developments. I hope the market will answer in a positive way that will only encourage more sustainable design!

E-Waste Competition Winners Announced

 

Note: This post was written by SEI staff, Aida Sefic Williams.

Winners have been announced in the International E-Waste Competition.  The competition is part of the Sustainable Electronics Initiative (SEI) at the University of Illinois at Urbana-Champaign.

The competition is designed to prompt the industrialized world to dialogue about product designs for environmentally responsible computing and entertainment. The goals of this competition are to learn about ways to re-use electronic waste (E-Waste) for new and productive means, explore new ideas of how to address E-Waste problems, and contribute to the body of knowledge that advances the practice of environmentally responsible product design.

The winners were announced at the Illinois Sustainable Technology Center (ISTC), the coordinating agency for the Sustainable Electronics Initiative.  ISTC is part of the Institute of Natural Resource Sustainability at the University of Illinois.

The videos of the winning entrants were shown as a part of the International E-Waste Video Film Festival. The videos of the winning entries will be shown on the websites of the e-waste competition www.ewaste.illinois.edu, www.istc.illinois.edu, www.sustainelectronics.illinois.edu, as well as SEI’s YouTube Channel.

Entries were judged in two categories: Technical/Geek and Artist/Designer. A total of 33 entries were submitted; 26 were in the Artist/Designer category, and 7 in the Technical/Geek category. Prizes were awarded for the top three projects within each category, along with two honorable mentions in the Artist/Designer category. The first, second, and third place winners will receive $5000, $3000, and $1000 monetary prizes, respectively. In addition, honorable mentions will receive $500. The total amount of money to be given out during the International E-Waste Competition is close to $20,000, which has been made possible through generous contributions by several sponsors, including Dell and Wal-mart.

Technical/Geek Category Winners

First Place

  • Team: Port-e-garden
  • Project name: Port-e-garden
  • School: University of Illinois at Urbana-Champaign
  • Video

Second Place

  • Team: Chaps
  • Project name: BioGrow
  • School: University of Illinois at Urbana-Champaign
  • Video

 

Third Place

  • Team: CSULB Studio Group #1
  • Project name: The Pure Drive Home Automation and Computing System
  • School: California State University, Long Beach CA
  • Video

Artist/Designer Category Winners

First Place

  • Team: revOlve
  • Project name: revOlve
  • School: Rochester Institute of Technology, New York
  • Video

 

Second Place

  • Team: eLiminators
  • Project name: E-volve
  • School: California State University, Long Beach CA
  • Video

Third Place

  • Team: eMotion
  • Project name: eMotion
  • School: California State University, Long Beach CA
  • Video

 

Honorable Mention

  • Team: CSULB ID 2011
  • Project name: The Personalized E-Waste Recycling Bin
  • School: California State University, Long Beach CA

Honorable Mention

  • Team: CSULB ID Team
  • Project name: E-Responsibility
  • School: California State University, Long Beach CA

The competition was started at UIUC in the fall of 2009. In 2010, the competition was expanded to an international base, where students from all over the globe were able to submit their projects and a 2-minute video online. Each project was judged on their project description and video.

The international scope of the competition was evident through students who submitted entries from various states in the US (Illinois, Minnesota, California, New York) and other countries (Cyprus, Canada, Australia, Turkey and South Korea). The jury of the competition included a variety of experts, including

  • Vicky Matranga, Design Program Coordinator of International Housewares Association;
  • Clive Roux, CEO of the Industrial Designers Society of America;
  • Joe Jasinski, Global Senior Industrial Design Manager at Dell, Inc.;
  • Steve Belletire, Design Area Head at Southern Illinois University;
  • Sam Al-Basha, Engineer at the IL Department of Commerce and Economic Opportunity;
  • Chris Newman, Materials and Management Branch of US EPA;
  • Mike Tibbs, Sr. Director of Information Systems Division Compliance at Wal-mart;
  • Roger L. Franz, Engineering Manager at Motorola;
  • and Will Larkin, Director of Vendor Management Office and Star Complex at Wal-mart.

Electronics and Sustainability: Design for Energy and the Environment

Note: This post was written by SEI staff, Aida Sefic Williams.

The Sustainable Electronics Initiative (SEI), part of the Illinois Sustainable Technology Center and the Institute of Natural Resource Sustainability at the University of Illinois at Urbana-Champaign (UIUC), is hosting their first electronics and sustainability symposium. The event will be he held on February 23 and 24, 2010 at the I-Hotel and Conference Center.

Continue reading “Electronics and Sustainability: Design for Energy and the Environment”

The Future of E-Waste

Note: This post was written by SEI staff member, Amy Cade.

Electronic recycling has been a recognized problem for a while now but not a whole lot has been resolved.

Europe, among other places, has been actively trying to solve this issue since early 1990s.  So, what can we learn from them? What are the absolute best solutions for our environment when it comes to electronic waste and what is feasible? Continue reading “The Future of E-Waste”